304 stainless steel tubing press fit fittings elbow
Press fitting system joins pipe without welding or bolting, can be widely used in cold and hot water supply, heating supply, fire protection,medicinal gas, industrial petroleum pipeline system etc.
Standard 304 stainless steel tubing press fit fittings elbow
:Press fitting standard: GB/T 19228.1-2003, DVGW W534-1995
and JWWA G116Pipe standard: GB/T 19228.2-2003,
BS EN 10312
and JIS G3448Sealing ring standard: GBT 19228.3-2003, EN681-1:1998
–Material: Stainless steel 304/304L and 316/316L available.
–Max working pressure 1.6MPa (equal to 232 psi),
–Testing water pressure: 2.5MPa for JIS sizes (equal to 362.5psi), and 5MPa for EN10312 sizes.
What kinds of O-Rings are suitable for your choosing ?
Option 1. CIIR(Chlorinated butyl rubber): Sanitary for human consumption,
not oil resistant. Suitable for drinking water, tap water,
hot and cold water, sanitary air.
Option 2. EPDM
(Ethylene-Propylene Diene Monomer):Sanitary for human consumer,
not oil resistant. Suitable for drinking water, tap water, hot and cold water, sanitary
air and compressed gas.
Option 3: FKM(Fluororubber): It is both oil proof and sanitary.
suitable for edible oil, compressed air. But a little more expensive than CIIR, EPDM and NBR.
304 stainless steel tubing press fit fittings elbow are widely used.
The products can apply to appropriate system based on customers’ requirements.
|Application field||Application system|
|steel industry||cold and hot water system|
|civil water supply||potable water system|
|pharmaceutical industry||air-conditioning system|
|municipal construction||water supply system|
|petrochemical industry||air compressor system|
|food & beverage industry||fuel system|
|power industry||lube oil industry|
|electronics industry||all kinds of gas pipeline|
|automotive industry||process pipe-system for different medium|
|other field||other pipeline system|
(1) all raw material and product size of our products need to go through strict
inspection to ensure that each product can meet the sanitation requirements.
(2) the raw material of o-ring seals is imported from abroad via British wras (water regulations advisory scheme) certification as
the healthy o-ring to ensure the safe drinking water.
(3) the installation tools are imported from German
which can ensure the safe installation and no leakage.
Features of 304 stainless steel tubing press fit fittings elbow
Green health environmental protection
Stainless steel meets the requirements of
the hygienic standard of direct drinking water and it is 100 percent recyclable.
Be reliable and safe for connection
Cartridge connection (connecting the pipe with press fittings) with
high strength and shock resistance can fix the joint dead at once to avoid loosening.
Be convenient and quick for operation
Pipes and press fittings are connected by appropriative hydraulic tools
which can avoid onsite welding, thread rolling and slot rolling as well as save time, labor and reduce unnecessary cost.
Saving the water resource
The strength of stainless steel pipe is greater than other water pipe material,
which reduces the possibility of water waste and saves the water resource.
High health environmental performance
All the pipes and fittings are made of ss304 or ss316 and o-ring seals are made of EPDM,
or ciir, or FKM, or NBR, which have the advantages of great environmental friendliness and long working life.
Reducing flow and pressure loss
The ID (internal diameter) of press fittings is the same with the ID of pipe and the compressed site
has little deformation, which reduce the flow and pressure loss.
Be suitable for insert installation and showing installation
Press fittings with fine appearance can be used for showing installation to improve the decorative effect.
And for the insert installation, the possibility of the water leakage is reduced greatly,
which lessen the risk of repair and renewal.
Free of maintenance and renewal
During 50 years to 70 years working life and high reliability design,
there is hardly need to renew and maintain, which reduces the costs of products and service.
Address: Room No.904,Area A of One world business center,
Yun he District ,Cangzhou,Hebei Province,China