Push fit connector jet water pipe fittings coupling dhgate
Stainless steel press fitting and pipe system
Water working pressure high to 1.6MPa (232psi);
Only need 8 second to finish install a connector,Push fit connector jet water pipe fittings caps dhgate very easy install;
Perfect choice to replace traditional pipe fitting.
Standard Push fit connector jet water pipe fittings coupling dhgate :
Press fitting standard: GB/T 19228.1-2003, DVGW W534-1995 and JWWA G116
Pipe standard: GB/T 19228.2-2003, BS EN 10312 and JIS G3448
Sealing ring standard: GBT 19228.3-2003, EN681-1: 1998
Technical information Push fit connector jet water pipe fittings coupling dhgate :
— Material: Stainless steel 304 and 316 available.
— Max working pressure 1.6MPa (equal to 232 psi),
Testing water pressure: 2.5MPa for JIS sizes (equal to 362.5psi), and 5MPa for EN10312 sizes.
— Working temperature from -20 to 110 degree centigrade (with Chlorinated butyl rubber O ring),
— Suit medium: Cold water, hot water, compressed air, gas, oil etc
Press fitting range Push fit connector jet water pipe fittings coupling dhgate :
Coupling — Equal coupling, Reducing coupling, Adjustable coupling, coupling with screw;
Elbow — equal elbow, reducing elbow, elbow with plain end, elbow with screw;
Tee — equal tee, reducing tee, tee with screw;
Other fittings — Pipe cap, pipe bridge and Flange.
Sealing ring material:
Option 1. CIIR(Chlorinated butyl rubber): Sanitary for human consumption, not oil resistant.
Suitable for drinking water, tap water, hot and cold water, sanitary air.
Option 2. EPDM(Ethylene-Propylene-Diene Monomer): Sanitary for human consumer, not oil resistant.
Suitable for drinking water, tap water, hot and cold water, sanitary air and compressed gas.
Option 3: FKM(Fluororubber): It is both oil proof and sanitary. Suitable for edible oil, compressed air.
But a little more expensive than CIIR, EPDM and NBR.
|Type:||Elbow,Tee,Cross,Reducer,Stub end,Sleeve,Cap,Manifold etc.|
|Standard:||America: ASME B16.9,ASME B16.11,MSS SP-95|
|China: GB/T12459,GB/T13401,GB/T 14383|
|Japan: JIS B2311,JIS B2312,JIS B2313|
|Germany: DIN 2615,DIN 2616,DIN 2617|
|Industry Standard: SH3408,SH3409|
|EU: BS EN 10253-2|
|Material:||Austenitic stainless steel:|
|Superaustenitic stainless steel: S31254|
|Duplex stainless steel: S31500,S31803(2205),S32304,S32205,S32760,S32750,HDR|
|Copper Nickel Alloy: B10,B30|
|Special steel: N06600,N08800,N08811, Alloy steel,Titanium alloy|
|Carbon manganese steel: 20# / Q235B / A105,16Mn,WPB|
|Technics:||Colding Forming,Cold Extruding|
Address: Room No.904,Area A of One world business center,
Yun he District ,Cangzhou,Hebei Province,China