thin wall press fitting pipe fit stainless tee
Stainless steel materials have high anti corrosion features ,good sanitations,
thin wall press fitting pipe fit stainless tee is the best choice on direct drink line medical treatment,
gas and fuel gas transmissions.
‘using are trends under rapid economic development situation. Stainless steel press fittings elbow ,cap ,tee,
reducers are widely used in various civil architectures. In developed countries, like USA,EUROPE AND JAPAN,
stainless steel pipes are used in main water, gas lines ,also high quality constructions chooses install one time in life and free maintenance lifelong, .
Press fittings pipes thin wall press fitting pipe fit stainless tee
GB/T 12771-2008 《Liquid flow transmitting stainless steel weld pipes》
GB/T 29038-2012 《Thin wall stainless steel pipe technical manual》
YB/T 4204-2009 《Stainless steel welded pipes for water supply》
Press fittings standards
GB/T 19228.1-2011 《Stainless steel press fittings》
GB/T 19228.2-2011 《Stainless steel press fittings connects uses thin wall pipes》
GB/T 19228.3-2012 《Stainless steel press fittings O ring seals》
Design and installation standards
10S407-2 《Construction water supply pipeline installation-thin wall stainless steel pipes》
GB50015-2010 《Design standards of construction supply and drainage》
GB50242-2012 《construction supply and drainageand heating engineering quality inspect specifications》
CJJ94-2009 《Town gas projects engineering construction and quality inspect specifications》
Features of thin wall press fitting pipe fit stainless tee:
1. Stainless steel strength extension≥520Mpa;
2. Data of anti-corrosions：
a.No rust in water and air;
b. During PH rate of 1-2.5sulfuric acid or iron sulfate’s corrosion speed ≤0.2mm/10 years;
3. Small thermal expansion figure
4. Good health
5 Using life 70 years, free maintenance, free replacement. Economic products.
6. 100% environmental products , recovery rate 100%.
Application:thin wall press fitting pipe fit stainless tee
The norminal diameters are: DN15, 20, 25, 32, 40, 50, 65, 80 and DN100, including GB 1 and GB 2.
GB 1 series is same size as EN10312, out diameters are: 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108mm.
GB 2 series is same size as JIS G 3448, out diameters are: 15.88, 22.22, 28.58, 34.00, 42.7, 48.6, 76.1, 88.9, 108mm.
Sealing ring material:
Option 1. CIIR(Chlorinated butyl rubber): Sanitary for human consumption, not oil resistant.
Suitable for drinking water, tap water, hot and cold water, sanitary air.
Option 2. EPDM(Ethylene-Propylene-Diene Monomer) : Sanitary for human consumer, not oil resistant.
Suitable for drinking water, tap water, hot and cold water, sanitary air and compressed gas.
Option 3: FKM(Fluororubber): It is both oil proof and sanitary. suitable for edible oil, compressed air. But a little more expensive than CIIR, EPDM and NBR.
Address: Room No.904,Area A of One world business center,
Yun he District ,Cangzhou,Hebei Province,China